ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6 139
Message 225 - Loopback test failed
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.
Message 226 - Card <number> RAM test failed
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.
Message 227 - Card <number> ROM checksum mismatch
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.