ACC Error Guide

ZMON Error Messages

Chapter 6 143

Message 241 - Card <number> $DWNL (upload) gives non-zero reply

Explanation: Before downloading the Mux card ZMON attempts to

read the ROM label of the firmware on the Mux card.

In this case the read has failed.

Action: Take the appropriate action to rectify the problem and

restart the Mux card or ZCOM system.

Message 242 - Card <number> can’t open firmware file: <reason>

Explanation: Message issued when ZMON encounters a problem

opening the firmware download file for the Mux card.

Action: Fix the problem with the file and restart the Mux card

with ZMON RESTART or restart ZCOM with ZMON

COLD.

Message 243 - Card <number> firmware file: <name>

Explanation: Message issued when ZMON encounters a problem

with the firmware download file for the Mux card. This

message will be associated with one describing the

problem.

Action: None

Message 244 - Card <number> firmware file read error: <reason>

Explanation: Message issued when ZMON encounters a problem

reading a record from the firmware download file for

the Mux card. The Mux will be unusable until the

problem is rectified.

Action: Replace the corrupt firmware file with a clean file and

restart the Mux card with ZMON RESTART or restart

ZCOM with ZMON COLD.