ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6144
Message 245 - Card <number> firmware file read error: corrupted
record
Explanation: Message issued when ZMON encounters a corrupt
record in the firmware download file for the Mux card.
The Mux will be unusable until the problem is rectified.
Action: Replace the corrupt firmware file with a clean file and
restart the Mux card with ZMON RESTART or restart
ZCOM with ZMON COLD.
Message 246 - Card <number> bad firmware file record length in
record <number>
Explanation: Message issued when ZMON encounters a corrupt
record in the firmware download file for the Mux card.
The Mux will be unusable until the problem is rectified.
Action: Replace the corrupt firmware file with a clean file and
restart the Mux card with ZMON RESTART or restart
ZCOM with ZMON COLD.
Message 247 - Card <number> error in download: <reason>
Explanation: Message issued when ZMON encounters a problem
when writing the firmware download file to the Mux
card. The problem may be caused by a problem with
the download file, the device file to the LDM, or a
hardware problem on the card itself. The Mux will be
unusable until the problem is rectified.
Action: Take the appropriate action to rectify the problem and
restart the Mux card or ZCOM system.
Message 248 - Card <number> $DWNL (download) gives non-zero reply
Explanation: Message issued when ZMON encounters a problem
when writing the firmware download file to the Mux
card. The problem may be caused by a problem with
the download file, the device file to the LDM, or a
hardware problem on the card itself. The Mux will be
unusable until the problem is rectified.
Action: Take the appropriate action to rectify the problem and
restart the Mux card or ZCOM system.