ACC Error Guide

ZMON Error Messages

Chapter 6154

Message 302 - Card <number> No ACC card at BC address <bus-addr>

address <addr>

Explanation: There is no ACC card at the address <addr> in the Bus

Converter <bus-addr>.

Action: Either correct the configuration in the ttgen .answ file,

or correct the hardware configuration.

Message 310 - Card <number> Tables (<size>) exceeds free memory

(<size>)

Explanation: The user is able to reconfigure the internal firmware

table memory allocation, as specified in the Utilities

Reference Guide. In reconfiguring these internal

memory allocations for this card, the sum of the

allocated dynamic memory tables has exceeded the

available free memory.

Action: You must reduce the memory you attempted to allocate

(given by the first number) to less then or equal to the

dynamic memory available (as given by the second

number). After re-running ttgen, you must restart the

ZCOM subsystem.

Message 311 - Card <number> Warning: only <number> buffers

available

Explanation The user is able to reconfigure the internal firmware

table memory allocation, as specified in the Utilities

Reference Guide. In reconfiguring these internal

memory allocations for this card, you have directly or

indirectly caused the number of ACC card buffers to be

reduced to less than 8,000. Below this number of

buffers, the normal operation of the ACC card may be

compromised.