ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6 155
Action Reduce the memory you attempted to allocate to other
resources (e.g. terminal tabels, message headers, trace
buffer), or decrease the buffer size (zbufsize), in order
to be able to increase the number of ACC buffers.
Depending on the card type, you may need to specify
this number using the zbufnbr interface tunable
parameter. After re-running ttgen, you must restart
the ZCOM subsystem.
Message 312 - Card <number> Unsupportable dynamic memory
configuration
Explanation This message applies to the Z7340A 8 port PCI ACC
card only. The user is able to reconfigure the internal
firmware table memory allocation, as specified in the
Utilities Reference Guide. You have chosen a dynamic
memory configuration which cannot be supported
because of the internal memory arrangement of this
ACC card. The 16 megabytes of memory is arranged
into 2x8 megabyte segments. The second segment may
only contain the firmware trace area and ACC buffers.
The memory configuration you have specified attempts
to allocate other resources into this second segment. In
addition, the trace buffer cannot be larger than the
second memory segment.
Action Reduce the memory you attempted to allocate to
resources other than buffers and trace buffer (e.g.
message headers, timers, terminal tables), and/or
reduce the size of the trace buffer. This will allow the
second memory segement to be allocated only to buffers
and the trace buffer. After re-running ttgen, you must
restart the ZCOM subsystem.
Message 320 - Incompatible firmware key table
Explanation: This message is displayed when ZMON is processing
the contents of the firmware download file, and detects
an error in the format of the embedded firmware keys
table.
Action: Replace the corrupt firmware file with a clean file and
restart the Mux card with ZMON RESTART or restart
ZCOM with ZMON COLD.