ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6 159
Message 339 - Could not convert string card value, <card-string> to an
integer. Errno <errno>: <errno msg> Input line: <string> from helper
script: <script-name>
Explanation: The string <card-string> was parsed as a card address
from the input line <string> from script <script-name>.
A file system error <errno> with explanation <errno
msg> was diagnosed in attempting to convert it to an
integer.
Action: Verify that the script file has not been corrupted. If the
problem recurs, contact HP support.
Message 340 - Error: ACC card <number> in your ttgen .answ file with
bus address <bc1>:<bc>:<addr> does not match the type of the card
located at that bus address in this system or specifies a card that does
not exist in this system. Please verify that the bus address of this card
in your ttgen file are correct.
Explanation: The specified ACC card <number> has an incorrect
hardware address for the system on which it is
attempting to run.
Action: Correct either the hardware address in the ttgen .answ
file, or the hardware configuration. Examine the output
of the ioscan(1M) -f command to verify the hardware
addresses of the ACC cards installed on the system.
This ACC card will be unusable until you restart the
ZCOM system.
Message 400 - File: <file-name>. Line: <number>: <string>
Explanation: This is an internal trace message.
Action: None.