ACC Error Guide

TTGEN Error Messages
Errors
Chapter 8 187
Error 158: “%s”(%d): Bad parity ”%s”, line ignored
(Severity 2)
Explanation Bad Port parity specified. The specified field in PORT
statement has an unexpected value. The line is ignored
in order to continue compilation.
Action: Check for misspelling or syntax problem. Use an
appropriate value.
Error 159: “%s”(%d): Bad stop bits “%s”, line ignored
(Severity 2)
Explanation Bad Port stop bits specified. The specified field in
PORT statement has an unexpected value. The line is
ignored in order to continue compilation.
Action: Check for misspelling or syntax problem. Use an
appropriate value.
Error 160: “%s”(%d): ASYNC mode must use internal clock
(Severity 2)
Explanation Port ASYNC mode must use internal clock. The
specified port configuration combination is invalid.
Action: Use an appropriate configuration.
Error 161: “%s”(%d): ASYNC mode must not use x1 clock
(Severity 2)
Explanation Port ASYNC mode must not use x1 clock. The specified
port configuration combination is invalid.
Action: Use an appropriate configuration.
Error 162: “%s”(%d): ASYNC mode must specify parity
(Severity 2)
Explanation Port ASYNC mode must specify parity. The specified
port configuration combination is invalid.
Action: Use an appropriate configuration.
Error 164: “%s”(%d): SYNC/SDLC mode must use x1 clock
(Severity 2)
Explanation Port SYNC/SDLC mode must use x1 clock. The
specified port configuration combination is invalid.
Action: Use an appropriate configuration.