ACC Error Guide

TTGEN Error Messages
Errors
Chapter 8192
Error 188: “%s”(%d): More than %d terminals on this port
(Severity 2)
Explanation The number of physical terminals defined on this port
exceeds the absolute limit for a port on this interface.
Action: Remove the invalid terminal definition.
Error 189: “%s”(%d): Bad node number “%s” (range %d..%d)
(Severity 2)
Explanation Specified node number is out of range.
Action: Use an appropriate value.
Error 190: “%s”(%d): Too many nodes defined (max %d)
(Severity 2)
Explanation The node definition exceeds the allowable number of
definitions.
Action: Remove the invalid entry.
Error 191: “%s”(%d): Re-defining node %d
(Severity 2)
Explanation The specified node number is previously defined.
Action: Use different node number or remove the duplicate
entry.
Error 192: “%s”(%d): Host name/IP address missing
(Severity 2)
Explanation The host name or IP address (in dot format) is missing
in the Remote-Node definition.
Action: Correct the Remote-Node entry and supply the
appropriate host name or IP address.
Error 193: “%s”(%d): Node ZLU %d not defined
(Severity 2)
Explanation The specified ZLU is not defined in
“TERMINAL-DEFINITION” section.
Action: Use a defined ZLU number or define such ZLU in
“TERMINAL-DEFINITION” section.