ACC Error Guide

TTGEN Error Messages
Errors
Chapter 8 201
Error 264: “%s”(%d): Bad Subchannel ITBS %s (range %d..%d)
(Severity 2)
Explanation Valid subchannel ITBS values are 0-63.
Action: Change to an appropriate value.
Error 265: “%s”(%d): Bad Subchannel timeslot number %s (range
%d..%d)
(Severity 2)
Explanation Valid timeslot numbers are 0-31.
Action: Change to an appropriate value.
Error 266: “%s”(%d): Bad Subchannel timeslot fill mask %s (range
%d..%d)
(Severity 2)
Explanation Valid timeslot fill mask values are (00-FF)hex.
Action: Change to an appropriate value.
Error 267: “%s”(%d): Port %d: duplicate instance %d of timeslots
assignment
(Severity 2)
Explanation Multiple timeslot assignments have been defined for a
given instance within a port.
Action: Delete duplicate timeslot assignment.
Error 268: “%s”(%d): Unexpected subchannel number %s for ZLU %d
(Severity 2)
Explanation
Action: Delete subchannel number for non-E1/T1 interface.
Error 269: “%s”(%d): Bad ttablesize %s (range %d..%d)
(Severity 2)
Explanation Valid ttablesize range is 160-1k, and should be in
multiples of 16.
Action: Change to an appropriate value.
Error 270: “%s”(%d): Invalid subchannel specification INV: %s
Explanation Only “INV=ON” or “INV=OFF” is permitted.
Action: Change to an appropriate value.