ACC Error Guide

ZX25D System Messages
CLASS: Serious 300-399
Chapter 12236
zx25d 303 X.25 initialization failure; zevent_rcvr failed with error <#>!
Explanation: The ZCOM API routine zevent_rcvr has unexpectedly
failed due to the indicated ZCOM error during the
initialization of the ACC X.25 subsystem. The X.25
subsystem will not be usable until this error is
corrected.
Action: Examine the specific reason for failure and take
corrective action as necessary. If the problem persists
and you are unable to correct the problem or the error
indicates an internal failure, contact your HP support
representative.
zx25d 304 Too many errors; ACC X.25 subsystem is unusable!
Explanation: The ZCOM API routine zread has unexpectedly failed
three consecutive times in a row. Each failure will have
logged a separate error message indicating the specific
reason for the failure. These messages should appear
immediately prior to this message in the ZCOM log file.
The zread routine is used to retrieve all user
application requests and X.25 protocol events. Since
the X.25 protocol driver is unable to retrieve critical
data and status messages, the X.25 subsystem has
been shutdown. The X.25 subsystem will not be usable
until this error is corrected.
Action: Examine the specific reason for failure and take
corrective action as necessary. If the problem persists
and you are unable to correct the problem or the error
indicates an internal failure, contact your HP support
representative.