ACC Error Guide

ZX25D System Messages
CLASS: Serious 300-399
Chapter 12 237
zx25d 305 Infinite loop detected in the PTT group linkage! The X.25
link ZLU <#> will not be usable.
Explanation: While scanning the Physical Terminal Table for all
Virtual Circuit ZLUs associated with the indicated
X.25 link ZLU, the X.25 Protocol driver detected that it
had gone into an infinite loop due to a corrupt PTT
group linkage word. This could only occur as a result of
an internal defect. Since the X.25 protocol driver was
unable to find all of the ZLUs associated with the X.25
link, the link has been marked as unusable.
Action: This is an internal defect in the ZCOM product.
Contact your HP support representative.
zx25d 306 ACC X.25 subsystem initialization failure; zsetql() on ZLU
<#> failed with error <#>!
Explanation: The ZCOM API routine zsetql has unexpectedly failed
due to the indicated ZCOM error during the
initialization of the ACC X.25 subsystem. The X.25
subsystem will not be usable until this error is
corrected.
Action: Examine the specific reason for the failure and take
corrective action as necessary. If you are unable to
correct the problem and the error indicates an internal
failure, contact your HP support representative.