ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12 239
zx25d 402 zltstore() for ZLU <#> unexpectedly failed with error <#>.
Explanation: The zltstore routine is used to find the offset of the X.25
configuration information within the Logical Terminal
Table. This routine has unexpectedly failed. This is a
serious error which will prevent the X.25 driver from
initializing the indicated X.25 link ZLU since the
driver is unable to find the configuration information.
The X.25 link ZLU has been marked as unusable. This
routine could fail if the TTGEN configuration file did
not contain the following statement, exactly as shown,
in the global parameters area:
Logical-Data 10 X25CNT,0, X25CNT_LDSIZE
Action: Check the error returned against those listed in this
guide and take corrective action as necessary. If the
problem persists and you are unable to determine its
cause or the error code indicates a probable internal
defect, contact your HP support representative.
zx25d 403 Unable to allocate system memory for X.25 link ZLU <#>.
Explanation: When the ACC X.25 subsystem tries to initialize an
X.25 link for the first time, it dynamically allocates a
data structure to hold link related information by
calling the HP-UX kernel routine MALLOC(). This
routine was unable to allocate the required amount of
memory. This is a serious error which will prevent the
X.25 driver from initializing the indicated X.25 link
ZLU.
Action: Check your system configuration to insure that you
have sufficient memory available and that your swap
space is large enough. If the problem persists and you
are unable to determine its cause, contact your HP
support representative.