ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12240
zx25d 404 The zcntl() to enable the X.25 link ZLU <#> unexpectedly
failed with error <#>.
Explanation: If the X.25 link configuration does not specify
no_autostart, the X.25 driver will automatically try to
bring the X.25 link up by issuing an zcntl call to enable
the X.25 link ZLU. This routine has unexpectedly
failed. This X.25 link is usable, but you will need to
manually enable it using the zmntr utility.
Action: Check the error returned against those listed in this
guide and take corrective action as necessary. If the
problem persists and you are unable to determine its
cause or the error code indicates a probable internal
defect, contact your HP support representative.
zx25d 405 The zcntl() to activate the X.25 link ZLU <#> unexpectedly
failed with error <#>.
Explanation: If the X.25 link configuration does not specify
no_autostart, the X.25 driver will automatically try to
bring the X.25 link up by issuing an zcntl call to enable
the X.25 link ZLU and immediately follow this with a
zcntl call to activate the X.25 link. The activate request
has unexpectedly failed. This X.25 link is usable, but
you may need to manually activate it using one of the
ZCOM utility programs.
Action: Check the error returned against those listed in this
guide and take corrective action as necessary. If the
problem persists and you are unable to determine its
cause or the error code indicates a probable internal
defect, contact your HP support representative.