ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12 243
zx25d 410 The zcntl() on ZLU <#> to disable the X.25 link has
unexpectedly failed with error <#>.
Explanation: During the normal processing of an X.25 link disable
request (the user disabled the X.25 link ZLU), the
driver is required to reissue the disable after the link
has been fully brought down. This causes the ZLU
disabled unsolicited status message to be delivered to
the application program. This request has
unexpectedly failed. This may result in the application
not receiving the X.25 Link ZLU disabled status.
Action: Check the error returned against those listed in this
guide and take corrective action as necessary. If the
problem persists and you are unable to determine its
cause or the error code indicates a probable internal
defect, contact your HP support representative.