ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12 249
Action: No action is necessary. This is an informational
message.
zx25d 423 There are no VCs defined on the X.25 Link ZLU <#>!
Explanation: An attempt was made to startup (enable) an X.25 link
ZLU that does not have any virtual circuits configured
on it.
Action: Correct your TTGEN configuration file or if you are
dynamically creating the VC ZLUs, correct your
application. The X.25 link can not be used until the
configuration is corrected.
zx25d 424 Link <#>: Unknown L2 state (<#>) for event <#>! Notify your
HP support representative.
Explanation: An X.25 protocol event occurred on the indicated X.25
link ZLU. However, when the X.25 protocol driver
attempted to process the event, the link state variable
contained an unknown state value. This probably
indicates that the data structure for the X.25 link has
been corrupted.
Action: This is an internal defect. Contact your HP support
personal.
zx25d 425 Link <#>: Call request timed out on SVC ZLU <#>!
Explanation: An outbound Call Request packet was transmitted,
however the remote DXE did not respond with a CALL
Connected or CLEAR Indication packet within the time
allowed (Timer T11 or T21). A CLEAR Request packet
has automatically been transmitted.
Action: Check the remote DXE and correct any problems
found.