ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12 251
Action: Correct the application program or modify the
configuration to allow the X.25 protocol driver to
automatically confirm inbound resets.
zx25d 429 Link <#>: Clear request timed out for SVC ZLU <#>!
Explanation: An outbound Clear Request packet was transmitted,
however the remote DXE did not respond with a Clear
Confirmation packet within the time allowed (Timer
T13 or T23). The Clear Request will be retransmitted
unless R23 has been exceeded.
Action: Check the remote DXE and correct any problems
found.
zx25d 430 Link <#>: Timeout for ZLU <#> in inconsistent state <#>.
Explanation: A VC protocol timeout event occurred on a VC ZLU
that is in a state that should never receive a timeout.
Action: In most cases, this message can be ignored. However, if
this message is frequently logged or abnormal behavior
is observed, you should contact your HP support
personnel.
zx25d 431 Link <#>: Reset retry counter (R22) exceeded for ZLU <#>!
For SVCs, the call has been cleared.
Explanation: An outbound Reset Request packet was retransmitted,
however the remote DXE is not responding with a
Reset Confirmation packet within the time allowed
(Timer T13 or T23) and the Reset Request retransmit
counter R22 was exceeded. The X.25 driver will
automatically issue a Clear Request if this VC is an
SVC. Otherwise, the PVC will be put into the Data
Transfer Ready state.
Action: Check the remote DXE and correct any problems
found.