ACC Error Guide

ZX25D System Messages
CLASS: Normal 400-499
Chapter 12252
zx25d 432 Link <#>: Clear request retry counter (R23) exceeded for
ZLU <#>! SVC being forced into the “idle” state.
Explanation: An outbound Clear Request packet was retransmitted,
however the remote DXE is not responding with a
Clear Confirmation packet within the time allowed
(Timer T13 or T23) and the Clear Request retransmit
counter R23 was exceeded. The X.25 driver is assuming
that the call is cleared and has put the ZLU into the
“idle” state. A ZLU in the idle state is allowed to place
outbound calls or accept inbound calls, if configured to
do so.
Action: Check the remote DXE and correct any problems
found.
zx25d 433 Link <#>: Too many X.25 links defined. Link ignored!
Explanation: More X.25 link ZLUs have been defined than the X.25
Protocol driver has table space for. This is currently
512 X.25 links. Note that although you may configure
up to 512 X.25 links, only 128 links are supported.
Action: Correct your X.25 configuration.