ACC Error Guide

ZX25D System Messages
CLASS: Warning 500-599
Chapter 12260
zx25d 503 No Logical Channel Number configured for PVC ZLU <#>.
An LCN will be dynamically selected for this PVC.
Explanation: During the initialization of an X.25 link, the X.25
protocol driver detected a PVC ZLU entry that was
incorrectly configured and did not contain a Logical
Channel Number in the Poll word. The X.25 driver will
automatically assign an unused LCN to this PVC ZLU
(if available). Note that the ZCOM utility zmntr can be
used to examine the LCN configured for each PVC
ZLU.
Action: No action is necessary. This is an informational
message. However, it is recommended that you correct
the configuration for this PVC.
zx25d 504 Duplicate LCN (<#>) configured for PVC ZLU <#>. A new
LCN will be dynamically selected for this PVC.
Explanation: During the initialization of an X.25 link, the X.25
protocol driver detected a PVC ZLU entry that was
incorrectly configured and contained the same Logical
Channel Number in the Poll word as another PVC ZLU
on the same X.25 link. The X.25 driver will
automatically assign an unused LCN to the indicated
PVC ZLU (if available). Note that the ZCOM utility
zmntr can be used to examine the LCN configured for
each PVC ZLU.
Action: No action is necessary. This is an informational
message. However, it is recommended that you correct
the configuration for this PVC.