ACC Error Guide

ZX25D System Messages
CLASS: Protocol 600-699
Chapter 12280
zx25d 628 Link ZLU <#> reset due to received DM frame.
Mux= <#>, Port= <#>, Subchannel= <#>.
Explanation: The X.25 link has gone down due to the receipt of a
Disconnected Mode (DM) frame. This DM frame is used
to inform the primary that the secondary is in a
logically disconnected state. However, it appears that
the remote DXE is still responding and the X.25
subsystem is in the process of re-establishing the X.25
link at level 2.
Action: No action is necessary. This is an informational
message.
zx25d 629 Link ZLU <#> reset due to received SABM.
Mux= <#>, Port= <#>, Subchannel= <#>.
Explanation: The X.25 link has gone down due to the receipt of a Set
Asynchronous Balanced Mode (SABM) command. This
message indicates the remote DXE has gone down
without the knowledge of the local system and is now
trying to resynchronize the link at level 2. The X.25
subsystem is in the process of re-establishing the X.25
link at level 2.
Action: No action is necessary. This is an informational
message.
zx25d 630 Link ZLU <#> reset due to received DISC.
Mux= <#>, Port= <#>, Subchannel= <#>.
Explanation: This message should never be observed during normal
operations.
Action: No action is necessary. This is an informational
message.