ACC Error Guide

ZX25D System Messages
CLASS: Protocol 600-699
Chapter 12 283
zx25d 641 Link ZLU <#>: Diagnostic Packet received. Diag code = <#>,
Explanation=0x<#>.
Explanation: This message is logged whenever a diagnostic packet is
received. The message contains the Diagnostic code
and Explanation fields from the diagnostic packet.
Action: No action is necessary. This is an informational
message.
zx25d 642 Link ZLU <#> X.25 Packet layer (lvl 3) restart complete.
Mux= <#>, Port= <#>, Subchannel= <#>.
Explanation: This message is logged whenever the X.25 subsystem
completes the restart processing for X.25 at level 3.
This indicates that the X.25 link is now fully
established and can be used to establish calls and
transfer data.
Action: No action is necessary. This is an informational
message.
zx25d 643 X.25 Protocol server started - Rev: 3.10 - 991201
Logical terminal area X25CNT: <#> Bytes
Explanation: This message is logged to indicate that the ACC X.25
subsystem has been initialized. The message includes
the revision code for the X.25 protocol driver and the
expected size of the Logical Data Area used to hold
X.25 link configuration and state information.
Action: No action is necessary. This is an informational
message.
zx25d 644 Link ZLU <#> X.25 shutdown initiated.
Mux= <#>, Port= <#>, Subchannel= <#>.
Explanation: This message is logged whenever the X.25 subsystem
shuts down an X.25 link due to a user request.
Typically this is through a call to zcntl to disable the
X.25 link ZLU or using zmntr to shutdown the link.
Action: No action is necessary. This is an informational
message.