ACC Error Guide

SNA/ACC Error Log Messages
SNACC Error Messages
Chapter 13292
SNACC Error Messages
snacc 00176: ERROR (0xB0): Attempted to do an operation to an ACC
system that is shutdown.
Explanation: The ZCOM system has been shutdown with the
zmasterd utility.
Action: Restart the ZCOM system with the zmasterd utility if
needed.
snacc 00177: ERROR (0xB1): An ACC ZLU is associated with a mux
card in the ACC physical terminal table but SNA/ACC internal tables do
not recognize this card.
Explanation: The SNA/ACC module received data from the ZCOM
subsystem for a card that does contain valid
SNA/ZCOM.
Action: This is a transient problem. It should clear up shortly.
If the condition persists, contact your local HP support
representative.
snacc 00178: ERROR (0xB2): An ACC ZLU is associated with a port in
the ACC physical terminal table but SNA/ACC internal tables do not
recognize this port.
Explanation: The SNA/ACC module is receiving data from the
ZCOM subsystem for a particular SNA link that has
been discarded (stopped) by the SNAplus subsystem.
The data is discarded.
Action: This is a transient problem. It should clear up shortly.
If the condition persists, contact your local HP support
representative.