ACC Error Guide

SNA/ACC Error Log Messages
SNACC Error Messages
Chapter 13 293
snacc 00179: ERROR (0xB3): Unable to open a primary ZLU. Function
called: <func name>; Return code: <#>
Explanation: SNAplus failed to establish a ZCOM port because the
zopen() function returned with an error.
Action: Make sure the ZCOM system has started properly.
Refer to Chapter 2, “ZCOM Error Codes,” for the ZCOM
return code value.
snacc 00180: ERROR (0xB4): Unable to the fetch the ZCOM header
table. Function called: <func name>; Return code: <#>
Explanation: Failed to establish a ZCOM link. The zinfo() function
returned a ZCOM error while retrieving ZCOM system
header information.
Action: Refer to Chapter 2, “ZCOM Error Codes,” to determine
the ZCOM error condition. Restart the ZCOM
subsystem if needed. If the problem persists, contact
your local HP support personal.
snacc 00181: ERROR (0xB5): Unable to fetch the ZCOM interface table.
Function called: <func name>; Return code: <#>
Explanation: Failed to establish a ZCOM link. The zinfo() function
returned a ZCOM error while retrieving specific port
information on the mux.
Action: Refer to Chapter 2, “ZCOM Error Codes,” to determine
the ZCOM error condition.
snacc 00182: ERROR (0xB6): Unable to fetch the ZCOM physical
terminal table from the ACC subsystem. Function called: <func name>;
Return code: <#>
Explanation: Failed to establish a ZCOM link. The zinfo() function
returned a ZCOM error while retrieving information on
a specific physical terminal table entry.
Action: Refer to Chapter 2, “ZCOM Error Codes,” to determine
the error condition.