ACC Error Guide

ACC Kernel Log Messages
ZISDN Kernel Driver: Disasters 1000 - 1999
Chapter 14 303
ZISDN Kernel Driver: Disasters 1000 - 1999
zisdn 1022 ISDN: ACC initialization failure: zinit failed with error <#>!
The ACC ISDN subsystem can not be used.
Explanation: The ZCOM API routine zinit has unexpectedly failed
due to the indicated ZCOM error during the
initialization of the ISDN/ACC subsystem. The
ISDN/ACC subsystem will not be usable until this
error is corrected.
Action: Look for the error number in Chapter 2, “ZCOM Error
Codes,” and take corrective action as necessary. If the
problem persists and you are unable to correct the
problem or the error indicates an internal failure,
contact your HP support representative.
zisdn 1023 ISDN: ACC initialization failure: zopen failed with
error <#>! The ACC ISDN subsystem can not be used.
Explanation: The ZCOM API routine zopen has unexpectedly failed
due to the indicated ZCOM error during the
initialization of the ISDN/ACC subsystem. The
ISDN/ACC subsystem will not be usable until this
error is corrected.
Action: Look for the error number in Chapter 2, “ZCOM Error
Codes,” and take corrective action as necessary. If the
problem persists and you are unable to correct the
problem or the error indicates an internal failure,
contact your HP support representative.
zisdn 1024 ISDN: ACC initialization failure: zsetql on ZLU <#> failed
with error <#>! The ACC ISDN subsystem is unusable!
Explanation: The ZCOM API routine zsetql has unexpectedly failed
due to the indicated ZCOM error during the
initialization of the ISDN/ACC subsystem. The
ISDN/ACC subsystem will not be usable until this
error is corrected.