ACC Error Guide

ZCOM Error Codes
Meanings of the Error Codes
Chapter 246
ZEORMLOOP (-93): OMX receiver maps into a loop
Explanation: When the ZCOM subsystem tries to deliver a data
message to the receiver for an outbound multiplexing
terminal and finds that the receiver ZLU is mapped
into an infinite loop, this error is returned. Normally,
this should not occur.
Action: Contact your HP support representative.
ZEORZLU (-94): OMX receiver ZLU out of range
Explanation: When the ZCOM subsystem tries to deliver a data
message to the receiver for an outbound multiplexing
terminal and finds that the receiver ZLU is invalid,
this error is returned. Normally, this should not occur.
Action: Contact your HP support representative.
ZENOIFT (-95): Not a defined ZCOM interface
Explanation: This error is reported by ZMON when it issues
requests to a Mux interface card that is not defined in
the TTGEN configuration file. Normally, this should
not occur and is probably caused by internal software
problem.
Action: Contact your HP support representative.
ZENORSP (-96): No empty response record
Explanation: When the ZCOM subsystem processes a send-with-wait
request (for example, zsend with mode 8), it allocates a
response record to keep track of the request status.
This error indicates all response records are in use. The
number of response records is not configurable and is
set to the number of program ZLUs by TTGEN.
Action: Re-design and modify the application to use fewer
send-with-wait requests.