ACC Error Guide

ZCOM Error Codes
Meanings of the Error Codes
Chapter 254
ZeNO_PORTS (-131): No defined ports on Mux
Explanation: This error is returned by the DAM when it is asked to
initialize an ACC Mux card that did not have any ports
defined for it. This could be a defect in TTGEN but
most likely was caused by an incorrect TTGEN
configuration file.
Action: Correct your TTGEN configuration file.
ZeSIO_MAP_FAILED (-132): Kernel sio_map() function failed
Explanation: This error is returned when the DAM attempted to
map a host address range into an I/O virtual address
range, as required by the DMA hardware, and this
mapping operation failed. This error prevents the DAM
from sending the transaction to the ACC card.
Action: Contact your HP support personnel.