ACC Error Guide

ZCOM Status Codes
Terminal State Control Status Codes
Chapter 3 69
TM_GRP_DSBL(08) Group not disabled
All other terminals on the same port and with the same
group poll address must be disabled before a terminal’s
configuration can be changed.
TM_NEW_GRP_DSBL(09) New group must be disabled
All other terminals on the same port and with the same
group poll address must be disabled before a terminal
can be added to that group.
TM_NOT_ALLOWED(10) Not allowed for this terminal
Not used.
TM_INV_SUBC(11) Invalid subchannel number
Subchannel numbers must be in the range zero to 31
for the Z7300A card.
TM_PROT_REJ(12) Protocol detected error
The protocol does not handle this type of request or the
request is invalid.
TM_MUST_DEL(13) Terminal must be deleted
The terminal must be deleted before changing the port,
subchannel or protocol assigned to it.
TM_TABLE_SIZE(14) Protocol table sizes too small
The protocol requires a larger table (typically terminal
table).
TM_REQ_FMT(15) Request format error
For a set terminal parameters request, the associated
buffer length is zero or the request data has an invalid
format.
TM_NO_SPACE(31) No buffer space
There are no free buffers on this port to process this
message.