ACC Error Guide

ZCOM Driver Log Messages
ZCOM Driver Messages
Chapter 5 91
zcom 00150: Error in copying data from ZNODE: <error text>
Explanation: This error is reported when there is a problem in
copying data from ZNODE’s program data space to the
LDM’s kernel data space. This could indicate
inconsistencies in the versions of the ZCOM kernel
drivers and the ZNODE daemon. This error will cause
ZNODE to terminate, thereby resulting in all remote
nodes being inaccessible.
Action: Verify that the correct revisions of the product have
been installed and correct any discrepancies as needed.
Specifically, do a what on HP-UX and ZNODE and
verify that the revision codes of ZNODE and the ZCOM
drivers match. If the problem persists, contact your HP
Support Representative.
zcom 00151: Invalid API response ID <#> returned from node <#>
Explanation: The LDM has received from ZNODE a remote API call
completion response with a response ID that does not
match the original request. The LDM assigns a
response ID whenever a remote API request is issued
and stores this information in a response record. When
the completion response for the request arrives from
the remote, the response ID is validated. This error
could be caused by incompatible revisions of the ZCOM
software being installed on the local and remote nodes,
data corruption during the inter-system transfer, or an
internal defect in the ZCOM subsystem.
Action: Verify that all systems running the ZCOM software
have been installed with the same version (release) and
correct as needed. Verify that your communication
links are operating properly. If the problem persists,
contact your HP Support Representative.