ACC Error Guide

ZCOM Driver Log Messages
ZCOM Driver Messages
Chapter 5 95
zcom 00159: Can’t build response for node <#>: <error text>
Explanation: The LDM attempted to link a deferred response to a
response record for a remote request (e.g. zsend mode
8), but detected an unexpected error. The specific
reason for the error is given in the error text displayed
in the message. The completion response message is
lost and the remote application will eventually receive
a ZENTOUT (-23, Remote node timed out) error for the
request.
Action: Examine the error text and correct the problem if
possible. Check for possible incompatible versions of
ZCOM software installed. Try shutting down and
restarting the ZCOM subsystem. If the problem
persists, contact your HP Support Representative.
zcom 00160: Can’t send message to node <#>: <error text>
Explanation: The LDM tried to place application data or a response
message for the indicated remote node on the ZNODE
queue but encountered an unexpected error. The
specific reason for the error is given in the error text
displayed in the message. The application data or
response message is discarded. This may affect the
remote application.
Action: Examine the error text and correct the problem if
possible. Check for possible incompatible versions of
ZCOM software installed. Try shutting down and
restarting the ZCOM subsystem. If the problem
persists, contact your HP Support Representative.