ACC Utilities Reference Guide

ZTERM - Interactive Routine Interface
ZTERM Available Commands
Chapter 4106
140 2020 2020 2020 2020 2020 2020 2020 2020 2020 2020
150 0000 4F46 0000 0000 0000 0000 0322 8F5C 0000 0000 OF ” \
160 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
170 0000 0000 0000 0000 0000 0000 000B 0000 0000 FFFF ““
180 0001 001F 0000 FFFF 0007 0007 0007 0007 0000 0000 ““
190 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
200 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
210 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
220 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
230 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
240 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
250 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
260 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
270 0000 0000 0000 0000 0000 0000
09:03:50 *
DP - Display Physical Terminal Table Information
Format: DP,ZLU,[ZLU2],[+Q]
Displays the physical terminal information for the specified terminal
ZLU, or range of ZLUs, in hexadecimal and ASCII. The +Q option
suppresses the display of the hexadecimal data. See under “Physical
Terminal Table” in the section on Table and Data Structures in the ACC
Programmer’s Reference Guide, for the physical terminal table layout.
Example
ZTERM> dp 601
20:11:27 Owning ZLU 601
20:11:27 MUX number 0
20:11:27 Port number 1
20:11:27 Term. number 0
20:11:27 Port linkage A857F0h
20:11:27 HPQ linkage 0h
20:11:27 LPQ linkage 0h
20:11:27 Rx node 0
20:11:27 Rx ZLU 0
20:11:27 Rx node cntrl 0
20:11:27 Rx ZLU cntrl 0
20:11:27 DVT status 9000h
20:11:27 FWT status A100h
20:11:27 Physical type 62
20:11:27 Poll address 0h
20:11:27 Select address 0h
20:11:27 Option word 0h
20:11:27 Call address No address