ACC Utilities Reference Guide

ZSCAN - Display ZCOM Tables & Buffers
ZSCAN Available Commands
Chapter 5142
Examples:
zscan> nd
Local node number: 222 ZNODE pid: 1945 Queue low: 5
Node table size: 10 ZNODE signal: 16 Queue high: 10000
ZNODE idle: 0 Queue waiter: 0
Node# T.Out Hosts State In.Msg In.Bytes Out.Msg Out.Bytes
222 0 0 Up 24 23432 12 1232
111 5 1 Up 0 0 0 0
ZNODE.Queue N.Msg N.Bytes Head:Tail(hex)... Waits Total.Msg Max.M Limit......
0 0 00000000:00000000 0 0 2147483647M
zscan> nd 111
Node# T.Out Hosts State In.Msg In.Bytes Out.Msg Out.Bytes
111 5 1 Up 12 2376 5 742
#1: hptest1 Up 12 2376 5 742
Note that the Head:Tail column are the buffer addresses that may be
used by the BF command to view the buffer contents.
PT - List Physical Terminal
Foramt: pt [first] [last] [c|q|r]
Display physical terminal table information from Physical Terminal
Table (PTT) numbers [first] to [last]. If option [c] is specified, the static
configuration information is displayed. If option [q] is specified, the
detailed information about the PTT data queues is displayed. Otherwise,
the general run-time information is displayed.
Example:
zscan> pt 1 2
PTT# ZLU# Mx:P:Sc:Term* DrStt FwStt NxtPTT XpsPTT HtxPTT LtxPTT
1 1 0:0:**:00000 9000h A100h 2
2 300 0:0:**:00001 F000h 0800h 3
zscan> pt 1 2 c
PTT# ZLU# Mx:P:Sc:Term* PType Poll. Slct. Optn. V.C.# Config..........
1 1 0:0:**:00000 25 4008h 48EAh 003Ah 4 0000000000000000
2 300 0:0:**:00001 26 4000h 0000h 0350h 0 0000000000000000