ACC Utilities Reference Guide

ZSCAN - Display ZCOM Tables & Buffers
ZSCAN Available Commands
Chapter 5 147
Example:
zscan> rr 1 9
RspID Address. Type... R.Code Seq.Number Time R.Node Q.Msg Q.Head:Tail(hex).
1 00000000 0 0 0 0 0 00000000:00000000
2 00000000 0 0 0 0 0 00000000:00000000
3 00000000 0 0 0 0 0 00000000:00000000
4 00000000 0 0 0 0 0 00000000:00000000
5 00000000 0 0 0 0 0 00000000:00000000
6 00000000 0 0 0 0 0 00000000:00000000
7 00000000 0 0 0 0 0 00000000:00000000
8 00000000 0 0 0 0 0 00000000:00000000
9 00000000 0 0 0 0 0 00000000:00000000
Note that the values in the Head:Tail columns are the buffer addresses
that may be used by the BF command to view the buffer contents.
TE - Terminal Options
Format: te [iftno] [c|q|r]
The TE command displays physical terminal table information from
Physical Terminal Table (PTT) in interface [iftno]. If option [c] is
specified, the static physical configuration information is displayed. If
option [q] is specified, the detailed information about the PTT data
transmit queues is displayed. If option [r] is specified, information about
terminal receiver ZLUs is displayed. Otherwise, general run-time
information is displayed.
Examples for interface 0:
zscan> te 0
PTT# ZLU# Mx:P:Sc:Term* DrStt FwStt NxtPTT XpsPTT HtxPTT LtxPTT
1 1 0:0:**:00000 9000h A100h 2
2 300 0:0:**:00001 9000h A000h 3
3 301 0:0:**:00002 9000h A000h 4
4 302 0:0:**:00003 9000h A000h 5
5 303 0:0:**:00004 9000h A000h 6
6 304 0:0:**:00005 9000h A100h 1
7 2 0:1:**:00000 9000h A100h 8
. . . . . . . .
35 328 0:5:**:00004 9000h A000h 36
36 329 0:5:**:00005 9000h A100h 31
37 7 0:6:**:00000 9000h A100h 37
38 8 0:7:**:00000 9000h A100h 38
zscan>