ACC Utilities Reference Guide

ZMNTR - ZCOM Runtime Monitor
Commands
Chapter 384
The [opts] parameter allows the additional display of the TEXT,
FILENAME, and NAM records from the ACC card download file. The
options can be in any order.
The options are:
N - Display TNAM records
T - Display TEXT records
F - Display FILE records
P - Display port configurations (default)
S - Display subchannel and timeslot configurations
If no options are specified, P is assumed.
Example:
Interface card information for ACC ttgen input file
TTGEN source /opt/acc/cfg/loopback.answ
object /opt/acc/cfg/loopback.tmem
Mux:01 Bus:00/00 Slot:01 Trms:0009 Card Stat:Up and active
Hardware Revision: Rev.A
Firmware download file: /opt/acc/z7400a/loopback.zabs
Module: VMUX-1.1 Linktime: Wed Sep 10 05:43:06 1997
ROM-ID: Z7340A [01.B] Updated: Wed Apr 16 16:00:00 1997
Connection: RS232 panel MPU activity: 0%
Pt# Status TXlim TXusd PMode Cmode Ecde Clk Baud Mult Parity
0 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
1 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
2 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
3 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
4 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
5 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
6 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
7 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
The following Mux card information displayed in the listing:
Mux The Mux number assigned to this interface in the
TTGEN configuration file.
Bus The bus converter address for this interface. Note that
usage of this term varies with type of HP 9000 system.