ACC X.25 Protocol User's Guide

X.25 Application Programming
ZX25INT_CONF (3X) — ACC X.25
Chapter 4 113
ZxeMUST_CALL_ZX25INFO (17) The zx25info() routine has not been
called. You must call zx25info before
issuing any other zx25...() calls.
ZxeBAD_ZX25INFO_ADDR (18) The pointer to the zx25info_type
structure does not contain the same
address that was passed to the
zx25info() routine.
ZxeX25_NOT_INITIALIZED (98) The ACC X.25 subsystem has not
been initialized. You must run
zx25d_init before issuing any zx25...()
calls.
ZxeX25_TBL_FULL (99) The X.25 routines maintain an
internal table for accessing remote
ZCOM nodes. This table has room to
access up to 20 different ZCOM nodes
(including the local node). This
request attempted to access the 21st
ZCOM remote node and the internal
table used had insufficient space to
save the routing data.
NOTES The calling program (or thread) must call zx25info before calling this
routine. In a multi-threaded application, each thread must make a
separate call to zx25info using a per-thread ZCOM X.25 access data
buffer zxip. The per-thread data buffer can then be used to call this
routine.