ACSE/Presentation and ROSE Interface Programmer's Guide
48 Chapter 4
Programming Guide
1. Prepare the System
1. Prepare the System
Before you use the ACSE/Presentation interfaces, make sure that the
following has been done:
• Verify HP OTS/9000 h as been installed correctly.
• Check that the presentation addresses, in particular, the local
NSAP(s) used by the ACSE/Presentation applications that have been
configured in the OTS configuration file.
• Verify that HP OTS/9000 h as been started either manually using
osiadmin or at start-up time.