AD299A/AD355A Fibre Channel Mass Storage Adapters Installation Guide

Fibre Channel Adapter Installation for HP-UX
LED Interpretation
Chapter 1
13
LED Interpretation
Obtaining Card Information After Installation
Example of Card Information After Installation
fcmsutil /dev/fclp#
Vendor ID is = 0x10df
Device ID is = 0xfe00
PCI Sub-system Vendor ID is = 0x103c
Table 1-2 AD299A/AD355A LED Interpretation Table
Yellow LED Green LED
HBA State
1 Blink ON Normal Operation (1 Gb link rate, link
up)
2 Blinks ON Normal Operation (2 Gb link rate, link
up)
3 Blinks ON Normal Operation (4 Gb link rate, link
up)
OFF Slow blink Normal (link down or not started)
OFF OFF Slot Not Powered, or Adapter Card
Initialization Failure
ON OFF POST Failure (dead board)
Slow blink OFF Wake-Up Failure Monitor
Fast blink OFF POST Failure
Flashing OFF POST Process in Progress
OFF ON Failure While Functioning
ON ON Failure While Functioning
Slow blink Slow blink Offline for Download
Fast blink Slow blink Restricted Offline Mode (waiting for
restart)
Flashing Slow blink Restricted Offline Mode (test active)