ATM Configuration and Troubleshooting Guide
Getting Status Information with ATM Commands
Chapter 7142
• “Getting Information about an ATM Adapter” on page 143.
• “Getting Information about ATM Network Interfaces” on page 144.
• “Getting ATM Information” on page 147.
• “Getting Information for All Active Virtual Circuits” on page 148.
• “Getting Information for a Specific VPI and VCI” on page 150.
• “Getting Statistics for the AAL Interface” on page 151.
• “Getting Cell Statistics, Addresses, Used VCCs, and UNI Version” on
page 151.
• “Getting Adapter Status, Physical Layer Statistics, and Medium
Information” on page 152.
• “Getting Adapter Traffic Parameter Configurations (SVCs/PVCs)” on
page 153.
• “Getting the Classical IP ARP Table” on page 153.
• “Getting an ATM Adapter’s SVC Traffic Profiles” on page 154.
• “Getting an ATM Network Interface’s SVC Traffic Profiles” on
page 155.
• “Getting LAN Emulation Configuration Information” on page 155.
• “Getting the LAN Emulation ARP (LE_ARP) Table” on page 157.
• “Getting MPC Status and Statistics” on page 158.
• “Getting MPC Ingress/Egress Cache and MPS Tables” on page 160.
• “Getting Adapter IP Statistics and Traffic (HP-UX 10.20)” on
page 162.
• “Getting Network I/F IP Stats/Traffic (HP-UX 11.X)” on page 164.
• “Getting Installed Adapter Information (HP-UX 10.20)” on page 164.
• “Getting Adapter & Network I/F Info (HP-UX 11.X)” on page 165.
• “Checking for Bind Errors” on page 165.
• “Determining the Type of an ATM Adapter” on page 166.