ATM Configuration and Troubleshooting Guide

Getting Status Information with ATM Commands
Command Examples
Chapter 7 157
Note that for the above example, only the primary LEC has been
configured.
To list all current ELAN interfaces, use the command netstat -i.
Getting the LAN Emulation ARP (LE_ARP) Table
Use the following command to display the current MAC-to-ATM address
mappings used by the ATM LAN Emulation Address Resolution Protocol
(LE ARP) for a specified ATM network interface:
elarp -n net_interface
The output from the elarp -n net_interface command looks like this
(note, this example is for a configuration that includes LANE V2 and
MPOA):
MAC-to-ATM and RD-to-ATM ARP table entries for Primary LEC
Destination LLC Destination VPI,VCI
MAC Addr or Mux ATM Address
Ring/Bridge
------------------------------------------------------------------------
080009c6fc0a 47000580ffe1000000f21a1e28.080009c6fc0a.00 0,50
080009c6fc0a LLC 47000580ffe1000000f21a1e28.080009c6fc0a.01 0,51
444/8 47000580ffe1000000f21a1e28.0020da8066b7.00 0,52
444/8 LLC 47000580ffe1000000f21a1e28.0020da8066b7.04 0,53
080009c6fcad 47000580ffe1000000f21a1e28.080009c6fcad.00 0,100
080009c6fcef 47000580ffe1000000f21a1e28.080009c6fcef.00 0,102
MAC-to-ATM and RD-to-ATM ARP table entries for Secondary LEC
(High Availability Environment)
Destination LLC Destination VPI,VCI
MAC Addr or MUX ATM Address
Ring/Bridge
------------------------------------------------------------------------
080009c6fc0a 47000580ffe1000000f21a1e28.080009c6fc0a.20 0,51
444/8 47000580ffe1000000f21a1e28.0020da8066b7.20 0,54
444/8 LLC 47000580ffe1000000f21a1e28.0020da8066b7.21 0,55
080009c6fcad 47000580ffe1000000f21a1e28.080009c6fcad.20 0,202
080009c6fcad LLC 47000580ffe1000000f21a1e28.080009c6fcad.21 0,203
080009c6fcef 47000580ffe1000000f21a1e28.080009c6fcef.20 0,205