ATM Configuration and Troubleshooting Guide

Troubleshooting
Troubleshooting Classical IP
Chapter 9214
QSAAL and Q93b. Symbolic values of the fields are provided if the -N
option is used in the netfmt command; otherwise, output is formatted in
hexadecimal. If you use the -1T option (terse mode), the formatter
produces only the most significant fields in the traced packet.
See “Tracing” on page 292 for more information.
H Examine the IP/ARP table. Use the command atmmgr 0 show -i.
One of the entries displayed should contain the IP address of the
destination associated with an ATM address.
I Call HP. See “Contacting Your HP Representative” on page 281 before
calling HP.