ATM Configuration and Troubleshooting Guide

Logging and Tracing ATM Activity
Logging
Chapter 10 291
The default log file is specified in /etc/nettlgen.conf. You can change
the default log files by editing the /etc/nettlgen.conf file.
Logging Options
To modify the default logging options, use the nettl command with the
-log and -entity parameters, as follows:
nettl -log disaster error warning informative -entity atm
This command causes ATM disaster, error, warning, and informative
messages to be logged. You can also use the abbreviations d, e, w, i, and
-e (for -entity).
Stopping Logging
To stop nettl, use this command:
nettl -stop
NOTE This command stops both logging and tracing.