ATM Configuration and Troubleshooting Guide

Logging and Tracing ATM Activity
Viewing Log and Trace Files
Chapter 10 297
where dev is the card instance number of the ATM adapter.
User Filter Options
The user filter options are used to include or exclude trace records for
users at specific ATM levels such as AAL (data transfer), ILMI, IP, ARP,
and signalling Protocol Data Units (PDUs).
For AAL and ILMI PDUs For AAL and ILMI PDUs, the syntax is as
follows:
atm user_aal status
atm user_ilmi status
where status is one of the following:
• * to display the PDUs.
• !* for no display.
For IP and ARP PDUs For IP and ARP PDUs, the syntax is as follows:
atm user_iparp status
where status is one of the following:
• * to display both IP and ARP PDUs.
• !* for no display.
• !IP or !ARP to not display control or data frames, respectively.
LAN Emulation PDUs For LAN Emulation, the syntax is as follows:
atm user_lanemul status
where status is one of the following:
• * to display.
• !* for no display.
• !CTRL or !DATA to not display control or data frames, respectively.
Signalling PDUs For signalling, the syntax is as follows:
atm user_sig status
where status is one of the following:
• * to display QSAAL and Q93b PDUs.