ATM Release Notes

ATM Release Note for HP-UX 11i v2
Known Problems and Workarounds
Chapter 110
In an HA configuration with local recovery, if you have floating IP addresses configured,
you may not be able to traffic after both the primary and backup elan interfaces go down,
and the primary elan interface comes up before the secondary interface. If both elan
interfaces come up, you may recover normal traffic on the secondary interface, by forcing
the primary interface to go down temporarily, for instance, by disconnecting and
reconnecting the cable (do not reset either the ATM card or the elan interface). If you
want the traffic back on the primary interface, for instance, after traffic has resumed on
the secondary interface and the primary is up, force the secondary interface to go down
temporally by disconnecting and reconnecting the cable (do not reset either the ATM card
or the elan interface).