FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 Release Notes Version Number B.11.23.1009 HP Part Number: 5991-0461 Published: September 2010 Edition: 1.
Table of Contents FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 overview...........................5 New and changed features in this release..............................................................................................5 New features.....................................................................................................................................5 Known problems fixed in this version...................................................................
List of Tables 1 2 3 4 5 6 7 8 4 HP-UX September 2010 (AR1009) Fixes..........................................................................................5 HP-UX March 2010 (AR1003) Fixes................................................................................................5 HP-UX September 2009 Fixes..........................................................................................................5 HP-UX March 2009 Fixes.................................................................
This document provides information about the B.11.23.1009 release of the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2. FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 overview This release of the document for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 (version B.11.23.1009) documents defect fixes and version changes. New and changed features in this release New features The following feature is new with the B.11.23.
Table 5 HP-UX December 2008 Fixes Defect ID Description QXCR1000860999 The case where the fclp driver timed out on an I/O operation too soon has been fixed. QXCR1000871619 The case where the fclp driver did not recognize a single device with a loop ID of 0 on a private loop has been fixed. Table 6 HP-UX September 2008 Fixes Defect ID Description QXCR1000749444 Support has been added for HP's vendor-specific implementation of SNIA APIs for the Fibre Channel (fclp) driver.
HP-UX Boot Loader for IPF -- Revision 2.029 Press Any Key to interrupt Autoboot \EFI\HPUX\AUTO ==> boot vmunix Seconds left till autoboot 0 AUTOBOOTING...Could not open file vmunix to check for a directory Could not open vmunix loading failed HPUX> This issue will be addressed in a future system firmware update. It can be caused by entering the EFI shell without having configured boot devices in the EFI driver's configuration screens.
1. 2. 3. 4. 5. 6. 7. 8. 9. • To view the Emulex driver handle information, type Shell> drivers at the EFI shell prompt - - a list of drivers is displayed. Write down the driver handle associated with the Emulex SCSI Pass Thru Driver. The first column, labelled DRV, lists the driver handles. Enter the drvcfg -s command; for example, if the driver handle is 20 (your driver handle may be different): Shell> drvcfg -s 20.
NOTE: FibrChanl-02 on HP-UX 11i v2 is supported with VxVM 4.1 or later, including boot and Ignite/UX. Operating system and version compatibility The following software (or later versions) must be installed before installing the FibrChanl-02 (fclp) driver, version B.11.23.1009 into a system: • • • • • • • FibrChanl-00 (td) version B.11.23.03 or later (for HP-UX 11i v2 Update 3) Fibre Channel Mass Storage (FCMassStorage) version B.11.23.03 or later Product number B6191AAE, OnlineDiag bundle version B.11.23.
Related information The latest documentation for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 is available at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP-UX 11i v2 I/O Cards . Available documents include: • • • • Support Guide: includes an adapter overview, installation details, adapter configuration, troubleshooting and maintenance information, additional features, and regulatory information.