HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller Support Guide, September 2009

5. Find the SAS Host Bus Adapter’s Driver ID in the list, and make a note of the corresponding
Ctrl ID. In this example, the SAS Host Bus Adapter is Drv[2C], and the Ctrl ID is 2F.
Adding An Integrated Mirror Volume
To add an Integrated Mirror volume, follow these steps:
1. Start drvcfg, using the Driver ID and Ctrl ID of the SAS Host Bus Adapter (See “Determining
the Driver ID and Ctrl ID” (page 32)). In this example, the Driver ID is 2C, and the Ctrl ID
is 2F:
Shell> drvcfg -s 2C 2F
The Adapter List screen appears:
2. Select the SAS Host Bus Adapter (SAS1068) and press Enter. The Adapter Properties
screen appears:
Example: Adding, Viewing, and Deleting An Integrated Mirror Volume Using drvcfg 33