HP A6828A and A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapters Installation Guide

Installing the A6828A or A6829A Adapter
Verifying Installation
Chapter 212
Verifying Installation
This section includes information on verifying the installation of the
A6828A and A6829A adapters.
Verifying the A6828A Adapter Installation
To verify that the A6828A adapter is correctly installed, issue the
following command:
ioscan -fnk
For example, the applicable line in the ioscan output for the A6828A
adapter can have the following form:
ext_bus 0 0/0/10/0/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6828-60101
In this example, the third column shows the hardware path of the PCI
device/function (shown in bold). The A6828A supports one PCI
device/function because it has only one channel. In addition, since this is
a single channel HBA, one line is listed for channel A of the adapter
(denoted by a 0 as the last digit in the hardware path).
Verifying the A6829A Adapter Installation
To verify that the A6829A adapter is correctly installed, issue the
following command:
ioscan -fnk
For example, the applicable lines in the ioscan output can have the
following form:
ext_bus 0 0/0/10/0/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6829-60101
ext_bus 0 0/0/10/0/1 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6829-60101
In this example, the third column shows the hardware path of the PCI
device/function (shown in bold). The A6829A supports two PCI
devices/functions (one per channel). In addition, since this is a dual
channel HBA, two lines are listed - one for channel A of the adapter
(denoted by a 0 as the last digit in the hardware path), and one for
channel B (denoted by a 1 as the last digit).