HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

xv
New and Changed Documentation in This
Edition
This edition includes the following changes:
• Information on the auto termination feature has been modified.
• Information on assigning and setting the SCSI IDs has been
modified.
• Information on the Extended Firmware Interface Flash (EFI) utility
has been added.
Typographical Conventions
This document uses the following conventions:
Book Title The title of a book. On the web and on the Instant
Information CD, it may be a hot link to the book itself.
Emphasis Text that is emphasized.
Bold Text that is strongly emphasized.
ComputerOut Text displayed by the computer.
... The preceding element may be repeated an arbitrary
number of times.
Installing the A6829A
Adapter
Use this chapter to install the A6829A HBA,
connect external SCSI peripherals, specify
SCSI parameters, install SCSI driver,
configure LUN 0, add multi-initiator
support, verify the installation, and use the
EFI utility.
Troubleshooting Use this chapter to learn about
troubleshooting techniques, known
problems, workarounds, and how to contact
your Hewlett-Packard representative.
Table 3 Document Organization (Continued)
Chapter Description