HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Specifying SCSI Parameters
Chapter 226
Information on configuring each of the SCSI parameters is given in the
later sections.
hp server
rp8400
SCSI ID ✓✓
Maximum
data
transfer rate
✓✓
Auto term
state
1
✓
Bus width ✓✓
hp superd
ome
servers
SCSI ID ✓✓
Maximum
data
transfer rate
✓✓
Auto term
state
1
✓
Bus width ✓✓
1
See “Summary of Auto Termination Configurations” on page 39 for
information on systems where you can use the jumper to control auto
termination.
Table 2-2 Ability to Set SCSI Parameters on HP-UX Systems (Continued)
HP-UX
System
SCSI
Parameter
Method for Setting Parameter
Firmware
Suggested
Default
BCH
Commands
Jumper
(for the
Single
Channel)