HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Specifying SCSI Parameters
Chapter 2 37
Adapter Properties
Adapter PCI PCI PCI
Bus Device Function
53C875 60 01 01
<Device Properties>
Boot Support [Enabled]
SCSI Parity [Yes]
Host SCSI ID [ 5]
SCSI Bus Scan Order [Low to High (0..Max)]
Spinup Delay (Secs) [ 2]
Secondary Cluster Server [Yes]
Termination Control [Auto]
<Restore Defaults>
Step 5. Use the arrow keys to highlight the Device Properties option, and press
the [Enter] key. This displays the Device Properties screen; refer to the
following example:
Device Properties
SCSI Device Identifier MB/Sec MT/Sec Data Scan Scan
ID Width ID LUNs > 0
0 - 160 [80] [16] [Yes] [Yes]
1 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
2 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
3 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
4 - 160 [80] [16] [Yes] [Yes]
5 - 160 [80] [16] [Yes] [Yes]
6 53C1010-66 160 [80] [16] [Yes] [Yes]
7 - 160 [80] [16] [Yes] [Yes]
8 - 160 [80] [16] [Yes] [Yes]
9 - 160 [80] [16] [Yes] [Yes]
10 - 160 [80] [16] [Yes] [Yes]
11 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
12 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
13 - 160 [80] [16] [Yes] [Yes]
14 - 160 [80] [16] [Yes] [Yes]
15 HP A6491A HP16 160 [80] [16] [Yes] [Yes]
To change the maximum data transfer rate of the required device, use
the arrow keys to highlight the corresponding option under the MT/Sec
column, and then use the plus (+) or minus (-) keys to change the values.