HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Specifying SCSI Parameters
Chapter 250
Adapter Properties
Adapter PCI PCI PCI
Bus Device Function
53C875 60 01 01
<Device Properties>
Boot Support [Enabled]
SCSI Parity [Yes]
Host SCSI ID [ 5]
SCSI Bus Scan Order [Low to High (0..Max)]
Spinup Delay (Secs) [ 2]
Secondary Cluster Server [Yes]
Termination Control [Auto]
<Restore Defaults>
Step 5. Use the arrow keys to highlight the Device Properties option, and press
the [Enter] key. This displays the Device Properties screen; refer to the
following example:
Device Properties
SCSI Device Identifier MB/Sec MT/Sec Data Scan Scan
ID Width ID LUNs > 0
0 - 160 [80] [16] [Yes] [Yes]
1 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
2 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
3 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
4 - 160 [80] [16] [Yes] [Yes]
5 - 160 [80] [16] [Yes] [Yes]
6 53C1010-66 160 [80] [16] [Yes] [Yes]
7 - 160 [80] [16] [Yes] [Yes]
8 - 160 [80] [16] [Yes] [Yes]
9 - 160 [80] [16] [Yes] [Yes]
10 - 160 [80] [16] [Yes] [Yes]
11 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
12 HP 18.2GST318406LC HP05 160 [80] [16] [Yes] [Yes]
13 - 160 [80] [16] [Yes] [Yes]
14 - 160 [80] [16] [Yes] [Yes]
15 HP A6491A HP16 160 [80] [16] [Yes] [Yes]
To change the bus width of the required device, use the arrow keys to
highlight the corresponding option under the Data Width column, and
then use the plus (+) or minus (-) keys to change the values.