HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter

Specifying SCSI Parameters

Chapter 252

Are you sure you want to exit?

Save changes then exit this menu

Discard changes then exit this menu

Use the arrow keys to highlight your selection from the listed choices,

and then press the [ENTER] key to return to the EFI shell prompt.

Step 9. At the EFI shell prompt, issue the following command to reboot the

system:

reset

NOTE The system reboot is required for the new setting to take effect.