HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Adding Multi-Initiator Support
Chapter 2 57
Adding Multi-Initiator Support
In a multi-initiator configuration, multiple SCSI host bus adapters
(HBA) are connected to the same SCSI bus. Multi-initiator is supported
for A6829A HBAs having part number A6829A-60101 or higher.
NOTE Multi-initiator is not supported for HP A6829A SCSI HBA with part
number A6829A-60001.
If you need multi-initiator support for an Itanium-based system, follow
the steps mentioned in the section, “Multi-Initiator Support for
Itanium‚-Based System” on page 57.
If you need multi-initiator support for a PA-RISC based system, follow
the steps mentioned in the section, “Multi-Initiator Support for PA-RISC
Based System” on page 57.